Tag Archives: stairs

making stairs

I began making stairs for my new set. I had a sheet of 1/8″ thick fiberboard normally used for ceramic tile installation laying around. I cut the treads and the stringers on the bandsaw out of the fiberboard. 

The steps are installed here and base coated brown.

For the railings, I turned the individual pieces on the wood lathe and cut a slot under the bannister piece for the individual uprights to fit into.

TTo turn the pieces on the lathe, I had to rig up something that would hold the tiny pieces. I ended up using two sockets that held the square ends of the raw wood.

This is a shot of the upper landing area. The area below the platform that looks like handcarved wood is actually a textured ribbon that is glued in place and painted.

Go ahead, make a mess, have some fun.